ROLLING COUNTER
FIRE DOORS
Rolling Counter Fire Doors
Rolling Counter Fire Doors
|
|
Model
ERC10
Rolling
Counter Fire Doors (also called fire shutters) secure openings above counters
and other similar finished openings on interior and exterior walls. When the
compact components of Counter Fire Doors are desired, these units can fully
close to the floor.
Counter
Fire Door Labeling: 3 HR, 11/2 HR, 1 HR and 3/4 HR Underwriters' Laboratory
(UL) labels. |
Sizes: Fits
openings up to 16 wide when height is 76 or less, or openings up to 12 wide
when height is 10 or less.
UL Labeled
SmokeShield® Counter Fire Doors: Add optional UL labeled smoke and draft
control to counter fire doors. Containing smoke saves lives and building
property and also aids in fire containment by slowing oxygen flow to the fire
source. It's simple to double up on the protection of your building and may be
required by your local building code. For more information
click here.
Material and
Finishes: curtains are available in 22 gauge galvanized steel with
exclusive GalvaNex finish in light gray, powder coating as an available option,
or 22 gauge 300 series stainless steel with #4 finish. Galvanized steel
endlocks are provided per UL procedure.
Counter Fire
Door Mounting: UL approved for mounting to rated drywall, masonry, or steel
walls.
Operation:
M100 motor, chain or crank operating systems are recommended for ease of
testing and controlled automatic closing speed. Click on the Operator
Information button at right for a full description of these systems. Push up is
available for counter fire doors up to 80 sq. ft. where usage and testing is
infrequent.
UL 1 1/2 Hour
Labeled Countertops - Plastic laminate countertops are available in a range of
standard laminates in a single piece up to 10' wide, and in two pieces with
center joint to 16’ wide. 14 gauge, #4 finish stainless steel countertops
are custom designed to a maximum wall opening width of 11’2” for face
of wall units, 11’10” for between jambs, for a maximum 12” wall
thickness.
|
Rolling
Counter Fire Doors with Integral Frame and Countertop (Model ERC20)
Cornell’s Rolling Counter Fire Doors with Integral Frame and
Countertop, also referred to as Labeled Package Units, are assembled and welded
at the factory for a seamless, custom-built look. Units may be fitted to pass
window openings without field assembly, becoming an important time saver.
Labeling:
11/2 HR, 1 HR and 3/4 HR Underwriters' Laboratory (UL) labels. |
|
Sizes:
Openings up to 10 wide by 4 9 high in walls 4 1/2 to 12 thick.
Smoke Gasketing
available: UL listed perimeter smoke seals / UL tested vinyl astragal are
available for providing protection against smoke infiltration at head, guide
frames and sill.
Mounting: UL
approved for mounting to rated drywall or masonry wall construction. Between
Jambs Slip-In units are set into finished walls. Between Jambs Built-In units
wrap around finished walls; installation is done while wall is being
constructed.
Operation:
Manual push up operation only. Release Devices and Annunciators are
available. See fire door page for details.
Material and
Finishes: Curtains are available in 22 gauge galvanized steel with
exclusive GalvaNex finish in light gray, powder coating optional, or #22 gauge
300 series stainless steel with #4 finish.
Countertops:
Integral 300 series stainless steel with #4 finish countertops are
standard. Separate UL labeled plastic laminate countertops available. Or,
choose a No-Countertop option for openings with an existing countertop.
A Canadian Overhead Door Company Servicing all Ontario Canada
|
- Accurate Overhead
Limited 
